Cetus Sieve Pump or Gravity Fed

  • Shipping Weight: 100lbs
  • 5 Units in Stock
  • Manufactured by: Evolution Aqua

 Ask a Question 

$1,274.99

Add to Cart:
This Cetus has a variable inlet height using the unique patented Pondflow regulation system – for use when gravity fed. This allows water levels within the pond to drop without causing the circulating pump to be starved of water. The Cetus will allow a skimmer or a bottom drain to accept vast amounts of waste without excessive cleaning needed to be carried out. The water must then be pumped to either a normal filter above pond level (Nexus Eazy/Eazy Pod) or to a pressurized filter.

If pump fed, the sieve is placed above pond water level and then the exit water is gravity dropped into your main filter.

It is advised that all pressurized filters be pre-filtered using a Cetus to reduce excessive backwashing and maintenance due to heavy solids.

Can be gravity or pump fed (please specify)
Perfect fit screen so no waste can bypass
Totally reliable and simple to install
Plug and Play – comes with flexible boots to connect to pipe work
Greatly reduced backwashing / maintenance of pressurised filters
Robust one piece mould –no welded joints – no leaks!
Large waste collection area which slopes to sump outlet
Ideal for mechanically filtering skimmer lines
Patented float that gives constant flow for gravity-fed level fluctuations
Maximum flow rate 18,000 litres per hour (4,750 US GPH)
Tri-slot 300 micron wedge wire screen in 316L stainless steel on 100% of surface area
Increased levels of oxygen
Max Flow:

4,750 US gallons/hr

Inlet:

Gravity-fed 4 inch, Pump-fed 2 inch

Outlet:

Gravity-fed 2 inch, Pump-fed 4 inch

Outlet Waste:

3 inch

Height:

37.2 inches

Length:

33.5 inches

Width:

22.4 inches

Screen:

300 microns

This product was added to our catalog on Tuesday 13 August, 2019.

Manufacturer Info

Who's Online

There currently are 7 guests online.
Your IP Address is: 54.224.52.210
Copyright © 2024 Sea Side Aquatics Pond Division. Powered by Zen Cart