Category Archives: Bubble Magus

Bubble Magus New QQ3 Hang On Back Skimmer

Coming Soon, early 2018

Rated up to 125 gal.

QQ3YUGANG.420
QQ3分解图.418
QQ3背景.413
QQ3背景.414


Bubble Magus 10th Anniversary Special Limit Skimmer BM-100SE

Tags :

500-700L Aquarium
DSP2000 pump, DC24V, 18W.
Air intake 660L/H
Size: 240 X 190 X 550MM

100SE

100SE1

100SE3

100SE4

100SE4


Bubble Magus 10th Anniversary Special Limit Skimmer BM-99SE

BM-99SE

300~500L Aquarium
DSP1000 pump,DC24V;13W,
Air intake300L/H
Size:230 X 155 X 495MM

99se

99se1

99se2

99se3



Bubble Magus Sump Filter

 

ARF-1-1

ARF-1-2

ARF-1-3

ARF-1-4

The filter is a high-efficiency water filtration system which effectively removes suspended particles such as detritus, food, organic waste from the water column.

Use in marine aquariums, freshwater aquariums and corals system.

12″ long x 15.5 wide by 14″ tall

Bubble Magus ARF-1 Auto Roll Filter
ARF-1 Specifications
• 12v DC motor
• 110v Power adapter ULc  DC12v 1amp output
• Water level switch
• Filter roll Non woven 150mm width, 25M length
• 1” I.D inlet pipe, complete with Flex pipe
• 40x36x26cm total dimensions (including motor body)
• Internal sump mounted
The ARF-1 removes the need for filter socks. Water is fed into the internal chamber via the aquarium systems drain, and through the filter roll. When the water level rises in the chamber due to filter clogging the water level switch triggers the motor to wind on the filter roll to a new fresh piece. The water level will then drop repeating the process

 


Air Leak In Dosing Container

Unfortunately, it has brought up to our attention that there was a air leak in our 1.5L dosing container. The leak was from the side connection, what we found was at the join the glue dried up and left a little air hole. When the dosing unit pull the liquid, air entered from this hole.

Please contact us at seasideaquatics@yahoo.com with any issue

or you can easily prepare it with little silicone.

You can exam the join and see little gap / hole at the join. You can apply little silicone around the join areas, let it dry for about 1-2 hours. This would solve the issue.

You also can remove the connection buy counterclockwise the fitting. Then apply little silicon in the male thread area then screw the fitting back. Let it dry for about 1-2 hours, this would solve the issue.

IMG_1929

IMG_1928

IMG_1930

IMG_1932


Bubble Magus Curve B Series Skimmer

Coming Soon

MODEL : CURVE – B9
Pump : ROCK SP4200
Power : 220V/110V ,28W
Air intake : 1200L/H
Size :245*300*605MM
Capacity :1500L

MODEL : CURVE – B10
Pump : ROCK SP6000
Power : 220V/110V ,42W
Air intake : 1800L/H
Size :290*340*620MM
Capacity :1500L- 2000L

MODEL : CURVE – B11
Pump : ROCK SP8000
Power : 220V/110V ,60W
Air intake : 2300L/H
Size :350*400*650MM
Capacity :3000L

MODEL : CURVE – B12
Pump : ROCK SP10000
Power : 220V/110V ,70W
Air intake : 2800L/H
Size :350*400*625MM
Capacity :4000L

Curve-B9 (single outlet) -1
Curve-B9 (single outlet) -2
B9-1

B9-3

B10-1

B10-2

B11-1

B11-2

B12-1

B12-2


Bubble Magus DC Curve Skimmers

** COMING SOON **
APRIL 2016

Curve A5
Pump:Bubble-Magus Rock DSP1000
DC24V, 13W
AC/DC: AC 100-240V/ 50/60Hz, DC24V,1A
Footprinting:185 x 180x 470mm;
Aquarium:300-500L;
Water level: 7.90 inch

Curve A8
Pump:Bubble-Magus Rock DSP2000
DC24V, 18W
AC/DC: AC 100-240V/ 50/60Hz, DC24V,1.5A
Footprinting:225 x 255 x 565mm;
Aquarium:700-900L;
Water level: 10 inch

Curve A9
Pump:Bubble-Magus Rock DSP4000
DC24V, 28W
AC/DC: AC 100-240V/ 50/60Hz, DC24V,2.5A
Footprinting:250 x 295 x 610mm;
Aquarium:900-1500L;
Water level: 10 inch

A5-1

A5-2

A8-1

A8-2

A8-3

A9-1

A9-2



Bubble Magus DC Skimmer Series

In Stock Ready To Ship…

D8D9 front base

D8D9 front

D8D9 head

D8D9 side base

D8D9 top down base